Black plate (200,1)
Auto-wiper control
When the wiper lever is in the
position, the rain sensor senses the
amount o f rainfall on the windshield and
turns the wipers on or off automatically
(off―intermittent―low speed―high
speed).
The sensitivity of the rain sensor can be
adjusted by turning the switch on the
wiper lever.
From the center position (normal), rotate
the switch downward for higher
sensitivity (faster response) or rotate it
upward for less sensitivity (slower
response).
Higher sensitivity
Less sensitivity
Switch
Center
position
CAUTION
Ø Do not shade the rain sensor by
adhering a sticker or a label on
the windshield. Otherwise the rain
sensor will not operate correctly.
4-66
When Driving
Switches and Controls
CX-5_8DV2-EA-14K_Edition5 Page200
Tuesday, November 24 2015 8:47 AM
Form No.8DV2-EA-14K
To Next Page
Loading...
