Mazda cx-5 2016 - Pairing a Bluetoothaudio Device Without a Four-Digit PIN Code

Black plate (373,1)
3. Input the PIN code of your Bluetooth
®
audio device by pressing channel
preset buttons 1 to 4 while “PIN 0000”
is displayed.
Press channel preset button 1 to input
the first digit, 2 for the second, 3 for
the third, and 4 for the forth. For
example, if the PIN code were “4213”
press channel preset button 1 four
times (1, 2, 3, 4), button 2 twice (1, 2),
button 3 once (1), and button 4 three
times (1, 2, 3). If the “PIN 0000”
display disappears before finishing the
PIN code input, repeat the procedure
from Step 1.
NOTE
Some devices accept only a particular pairing
code (Usually, “ 0000” or “1234”).
If pairing cannot be completed, refer to the
owner's manual of your mobile device, and try
those numbers if necessary.
4. Press the audio contr ol dial while the
input PIN code is displayed.
“PAIRING” flashes on the audio
display.
5. Operate the Bluetooth
®
audio device
and set it to the pairing mode while
“PAIRING” is flashing.
6. When the pairing is completed,
and
“PAIR SUCCESS” are displayed after
about 10-30 seconds, after which
“PAIR SUCCESS” continues to be
displayed for three seconds, and then
the unit returns to the normal display.
NOTE
l
Some Bluetooth
®
audio devices need a
certain amount of time before the
symbol
is displayed.
l
If the pairing failed, “Err” flashes for three
seconds .
l
Pairing cannot be performed while the
vehicle is moving. If you attempt to perform
pairing while the vehicle is moving, “PAIR
DISABLE” is displayed .
l
If seven Bluetooth
®
audio devices have
already been paired to the vehicle, pairing
cannot be performed and “MEMORY
FULL” is displayed. Delete one paired
device to pair another one.
Pairing a Bluetooth
®
audio device
which does not have a four-digit PIN
code
1. Using the audio control dial, select the
pairing mode “PAIR DEV ICE ” in the
“BT SETUP” mode. (Refer to
“Bluetooth
®
audio set up” for details.)
2. Press the audio contr ol dial to
determine the mode. After “ENTER
PIN” is displayed on the audio display
for three seconds, “PIN 0000” is
displayed and the PIN code can be
input.
3. Press the audio contr ol dial while “PIN
0000” is displayed. “PAIRING” flashes
on the audio display.
4. Operate the Bluetooth
®
audio device
and set it to the pairing mode while
“PAIRING” is flashing.
5. As the Bluetooth
®
audio device
requires a PIN code, input “0000”.
Interior Features
Bluetooth®
5-77
CX-5_8DV2-EA-14K_Edition5 Page373
Tuesday, November 24 2015 8:49 AM
Form No.8DV2-EA-14K