Black plate (368,1)
1. Activate the Bluetooth
®
application of
the device.
NOTE
For the operation of the device, refer to its
instruction manual.
2. Press the pick-up button or talk button
with a short press.
3. Say:[Beep] “Setup”
4. Prompt:“Select one of the following:
Pairing options, confirmation prompts,
language, passcode, select phone or
select music player.”
5. Say:[Beep] “Pairing options ”
6. Prompt: “Select one of the following:
Pair, Edit, Delete, List, or Set Pairing
Code.”
7. Say:[Beep] “Pair”
8. Prompt: “Start the pairing process on
your Bluetooth
®
device. Your pairing
code is 0000 (XXXX). Input this on
your Bluetooth
®
device when
prompted on the device. See device
manual for instructions.”
9. Using the device, perform a search for
the Bluetooth
®
device (Peripheral
device).
NOTE
For the operation of the device, refer to its
instruction manual.
10. Select “Mazda” from the device list
searched by the device.
11. Input the 4-digit pairing code to the
device.
12. Prompt:“Please say the name of the
device after the beep.”
13. Say:[Beep] “XXXX - - -” (Say a
“device tag”, an arbitrary name for
the device.) Example: “Stan's device.”
NOTE
Say a paired “device tag” within 10 seconds.
If more than two devices are to be paired, they
cannot be paired with the same or similar
“device tag”.
14. Prompt:“XXXXXX - - - (Ex. “Stan's
device”) (Device tag). Is this
correct?”
15. Say: [Beep] “Yes”
16. Prompt:“Pairing complete”
After a device is registered, the system
automatically identifies the device. By
activating Bluetooth
®
Hands-Free again,
or by activating Bluetooth
®
Hands-Free
first after switching the ignition from OFF
to ACC, the system reads out a voice
guidance, “ XXXXXX - - - (Ex. “Stan's
device”) (Device tag) is connected”.
NOTE
l
When the pairing is completed, the
symbol is displayed.
l
Some Bluetooth
®
audio devices need a
certain amount of time before the
symbol
is displayed.
l
Device registration can also be done by
operating the audio unit.
l
Depending on the device, the registration
status may be lost after a certain period of
time. If this occurs, repeat the entire
process from Step 1.
Registered device read-out
Bluetooth
®
Hands-Free can read-out the
devices registered to its syst em.
5-72
Interior Features
Bluetooth®
CX-5_8DV2-EA-14K_Edition5 Page368
Tuesday, November 24 2015 8:49 AM
Form No.8DV2-EA-14K
To Next Page
Loading...
