Black plate (469,1)
3. Pull down the blade rubber and slide it
out of the blade holder.
4. Remove the metal stiffeners from the
blade rubber and install them in the
new blade.
CAUTION
Do not bend or discard the stiffeners.
You need to use them again.
5. Carefully insert the new blade rubber.
Then install the blade assem bly in the
reverse order of removal.
Maintenance and Care
Owner Maintenance
6-37
CX-5_8DV2-EA-14K_Edition5 Page469
Tuesday, November 24 2015 8:50 AM
Form No.8DV2-EA-14K
To Next Page
Loading...
