Black plate (520,1)
5. Start the engine of the booster vehicle
and run it a few minutes. Then start the
engine of the other vehicle.
6. When finished, carefully disconnect the
cables in the reverse order described in
the illustration.
7. If the battery cover has been removed,
install it in the reverse order of
removal.
NOTE
Verify that the covers are securely installed.
7-16
If Trouble Arises
Battery Runs Out
CX-5_8DV2-EA-14K_Edition5 Page520
Tuesday, November 24 2015 8:51 AM
Form No.8DV2-EA-14K
To Next Page
