MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
19
2. Change the line "option ipaddr" in the interface "lan" to the corresponding address.
3. If the MC100 is to go online via a router, the line option gateway 'aaa.bbb.ccc.ddd'
can be added (with the IP address of the router).
4. To save the changes, use the key combination Ctrl+o then Ctrl+x to exit.
5. Finally, type service network reload and press Enter.
After a few seconds the MC100 has the new IP address. If necessary, the network
connection at the host PC must be briefly disconnected and reconnected so that the PC can
obtain a new IP.
Using Luci Web interface
1. Click on "Network" in the left menu and then on "Interfaces".
2. Click on the "EDIT" button at the "LAN" interface.
3. Change IPv4 address to the wanted IP address and click on SAVE.
4. Click on SAVE&APPLY.
To Next Page
Loading...
