EasyManua.ls Logo

MC Technologies MC100 - Firewall Management; General Firewall Settings

MC Technologies MC100
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
51
15 Firewall
This subsection is divided into four categories: general settings, port forwards, traffic rules
and custom rules.
General settings/04/07
General Settings for firewall can be changed in General Settings screen. These settings are
defined as follows:
Input: All incoming packets can be: accepted, rejected, dropped.
Output: All outgoing packets can be: accepted, rejected, dropped.
Forward: All packets being sent to another device can be: accepted, rejected, dropped.
Additional zones for firewall can be created, edited or deleted.
Zone => Forwardings: Defines zones and their traffic flow.
Input: All incoming packets can be: accepted, rejected, dropped.
Output: All outgoing packets can be: accepted, rejected, dropped.
Forward: All packets being sent to another device can be: accepted, rejected, dropped.
Masquerading: Allows one or more devices in a zones network without assigned IP
addresses to communicate with the Internet.

Table of Contents

Related product manuals