MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
52
Additional actions can be performed with zones: add, edit, delete.
Common properties of newly created or edited zones can be edited in this panel.
The input and output options set the default policies for traffic entering and leaving this
zone while the forward option describes the policy for forwarded traffic between different
networks within the zone. Covered networks specify which available networks are
members of this zone.
MSS clamping: Change the maximum segment size (MSS) of all TCP connections passing
through this zone with MTU lower than the Ethernet default of 1500.
Advanced settings of new created or edited zone.
Restrict to address family option defines to what IP families the zone belongs to IPv4, IPv6
or both. Restrict masquerading to given source/destination subnets defines one or more
To Next Page
Loading...
