MC Technologies MC100 - Ser2 net Service Configuration

MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
50
14 Ser2net
Note: A hardware handshake is, using RS232 interface, not possible.
Ser2net can be enabled and configured using LuCI web Interface:
1. In LuCI web Interface, Click on "Services" in the left menu and then on "Ser2net".
2. Enable “GLOBAL”.
3. Enable one of the “Proxys”, ex. CFG0423E7.
4. Set wanted “Port” and type of “Protocol”.
5. Type wanted device (ex. /dev/ttymcx0 for Serial port RS232).
6. Click on “SAVE” then “SAVE&APPLY”.