MC Technologies MC100 - Analog and Digital IOs via Node-RED; MC100 GPIO IO Readout

MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
24
10 Readout analog and digital IO's via Node-RED website interface
MC100 GPIO
Analog Inputs (mA/V)
1. Add the inject node
2. Add voltage input/current input node
3. Add Debug node.
4. Wire and Deploy.
Digital Inputs
1. Add the inject node.
2. Add the digital inputs node.
3. Double click on MC100 GPIO digital input node to open the settings menu and
choose a Digital input.
4. Add Debug node (change name if wanted).
5. Wire and Deploy.
Digital Outputs
1. Add the Inject node.
2. Add the Digital output node.
3. Double click on MC100 GPIO digital output node to open the settings menu and
choose a Digital input.
4. Add Debug node (change name if wanted).
5. Wire and Deploy.