MC Technologies MC100 - MC100 SensT2 IO Management

MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
34
PWM
Port
Description
GND
Ground, Earth
PW2
Open collector digital output.
PW1
Open collector digital output.
PU
Input for internal protection diode (freewheeling diode) for
inductive loads. (positive supply voltage)
Function: Switching the digital outputs
Port
Parameter
Read
Write
Path
PW2
Prescaler {0,1023}
x
/sys/gpio_board/pwm/prescalar
Pulse {0,65535}
/sys/gpio_board/pwm/1
PW1
Prescaler {0,1023}
x
/sys/gpio_board/pwm/prescalar
Pulse {0,65535}
/sys/gpio_board/pwm/2
Period*{0,65535}
x
/sys/gpio_board/pwm/period
*Only if MC100 GPIO board supports Period.
MC100 SensT2
Digital Inputs
Port
Description
DGND1
Digital Ground1, electrically isolated to all (D)GND
I1 bis I4
Digital inputs
Input voltage: 0 to 30V
Switching threshold: approx. 6V
All input voltages with DGND1 as ground
VPU1
Not supported, please do not connect a signal
DGND2
Digital Ground 2, electrically isolated to all (D)GND
I1 bis I4
Digital inputs
Input voltage: 0 to 30V
Switching threshold: approx. 6V
All input voltages with DGND2 as ground
VPU2
Not supported, please do not connect a signal