MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
43
12 Setting Up Wifi
This section is only for MC100 devices that support wireless connection (Wifi).
MC100 in Access Point mode
MC100 can be used as an access point for other devices to wirelessly connect to it.
To set MC100 in Access point mode:
1. In LuCI, click on Network then on Wireless.
2. Under Wireless Overview, click on ADD.
3. In the tab General Setup, set Operating frequency to Legacy.
4. In the tab General Setup, enter an ESSID to become the name of your Wi-Fi
network.
5. In the tab Wireless Security, select an Encryption method (e.g. “WPA2-PSK”,
recommended for home/small office networks).
To Next Page
Loading...
