MC Technologies MC100 - LED Indicator Status

MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
42
LEDs
LED
Description
LED 1
Power
Green, Power supply
LED 2
Info
Green, Configurable.
LED 3
warn
Red, Configurable.
LED 4
Modem
Long-time Off: Searching for
connection.
Long-time ON: Connected.
Flashing quickly: Packet Data
transfer.
LED 5
status
Green, Configurable.
Default:
Blinking: Booting
ON: Device is ready to be used.
MC100 has three LEDs that can be configured: info, status and warn.
To configure the LEDS:
1. Login to MC100 web interface.
2. Click on System -> LED Configuration.
3. Click on “ADD LED ACTION”.
All possible LED configuration options:
Name: Name of the LED configuration.
LED Name: Colour and name of the LED.
Default state of the LED: On/Off.
Trigger: One of the various triggers can be assigned to an LED to changes its states.
Possible values are shown in a table below.
Trigger type
Description
heartbeat
Simulating actual heart beats
Always on
LED always stays on
Always off
LED always stays off
Custome flash interval
Blinking according to predefined timer pattern
netdev
Flashes according to link status and send/receive activity
Device: Network interface which is going to be tracked.
4
5
3
2
1