EasyManua.ls Logo

MC Technologies MC100 - Open-Source Software and Device Variants; Open-Source Software General

MC Technologies MC100
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
7
Basic safety requirement
Electrostatic discharges can damage the product!
Damage the product.
Observe the general precautions for handling electrostatically
sensitive components.
Moisture and liquids from the surrounding area can get inside
the product!
Risk of fire and damage to the product.
The product must not be used in wet or humid environments or in
the immediate vicinity of water. Install the product in a dry place
protected from splashing water. Turn off the power before
performing any work on a device that has been exposed to
moisture.
Short circuits and damage due to improper repairs and
modifications and opening of maintenance areas!
Risk of fire and damage to the product.
It is not permitted to open the product for repair work or
modifications beyond the removal and insertion of the plug-in cards
provided for this purpose.
Overvoltage and voltage peaks from the power supply
system!
Fire hazard and damage to the device due to overvoltage.
Install a suitable surge protection.
Distance between antennas and persons!
Too small distance between mobile phone antennas and
people can affect their health.
Please note that the mobile phone antenna must be at least 20 cm
away from persons during operation.
3 Use of open-source software
General
This product includes, among other things, so-called open-source software, which was
produced by third parties and published for free use by everyone. The open-source software
is subject to special open-source software licenses and the copyright of third parties. Every
customer can use the open-source software according to the license terms of the respective
manufacturer. The rights of the customer to use the open-source software beyond the
purpose of our product are regulated in detail by the respective open source software
license. The customer may freely use the open-source software, as provided for in the
respective valid license, beyond the purpose of the open-source software in our product. In
the case that there is a contradiction between our license terms for our product and the
respective open-source software license, the respective open-source software license takes
priority over our license terms as far as the respective open-source software is affected.

Table of Contents

Related product manuals