MC Technologies MC100 - 1-Wire Interface (OWServer, OWFS, OWhttpd)

MC100
Mobile programmable gateway
MC Technologies GmbH, Kabelkamp 2, 30179 Hannover, Germany
Tel: +49511 67 69 99-0, Fax: +49511 67 69 99-150, Website & Shop: www.mc-technologies.net, Email: info@mc-technologies.net
69
19 1-wire
The 1-wire driver is loaded and started during the boot process. The driver provides the
user with a command-option with 1-wire devices.
Note: Needs expansion board software version newer then 1.4.0.
OWFS 1-Wire file system is an easy way to use the powerful 1-wire system.
OWServer
OWserver can be Enabled using LuCI web Interface:
1. In LuCI web Interface, under Services click on 1-Wire Server.
2. Check Enabled check-box
3. Set Devices to: --i2c=/dev/i2c-0:0
4. Port can be changed as wanted, default is 4304.
5. SAVE&APPLY
Using OWFS file system
OWFS can be Enabled using LuCI web Interface:
1. In LuCI web Interface, under Services click on 1-Wire FS.
2. Check Enabled check-box
3. Mountpoint can be changed as wanted, default is /mnt/owfs
4. SAVE&APPLY