19
IPDOX parameters
Here is the detail of the parameters needed for IPDOX protocol:
Listening port:
Define the server listening port. IPDOX use TCP protocol.
Maximum Connections:
Maximum simultaneous connections allowed for this server. The default is 50.
If you network problem or panel timeout occurs, then you should adjust this value.
Password:
Password shared between server and IP panels.
Profiles:
IPDOX protocol does not have Panel timeout.
It uses three set of profiles to define different timing proper to Paradox Panels programming.
These three predefined sets are:
You can
change the
timing
settings of
each for
these
three
profiles.
No security (not supported by Extrium)
To Next Page
Loading...