31
TcpToCom heartbeats processing
How to connect ST Receiver with Extrium DT42 by USB
ST Receiver is a part of Securithor monitoring software (http://www.securithor.com/).
ST Receiver is the alarms reception module of Securithor: it sends alarms from multiple receivers to the
Securithor database.
Follows these few steps in order to connect your Extrium DT42 with ST Receiver.
First, plug your Extrium DT42 to the computer where ST Receiver is installed by serial or USB (you will
need drivers for USB).
Start ST Receiver, connect it to your database, and unlock it.
ST Receiver unlock
Default ST Receiver password is: “securithor”
You will see a list of COM ports available on your system.
To Next Page
Loading...