Install Heater Adapters
Heater is not explosion proof. Operation of
heater in an explosive atmosphere without
necessary safety precautions will result in serious
injury and death.
If operating in an explosive atmosphere, heater should be
brought up to temperature in a safe environment, then unplugged
before entering the explosive atmosphere for fusion.
Select appropriate heater and sidewall fusion heater adapters.
Clean heater surfaces and adapter surfaces. Attach the adapters
to the heater.
Place heater in insulated heater blanket.
Plug heater into a proper power source.
TX00455-04-07-14
Saddle Fusion Procedure
The combination unit is capable of saddle fusing up to an 8"
(200 mm) branch on any size main.
TX00454-9-22-94
Special Operations
- Saddle Fusion Procedure
PH00406-9-21-94
5 - 1
PH00416-11-1-94
PH00418-11-1-94
Assure Saddle Will Fit
For branch saddles, a nipple long enough to extend through both
movable jaws should be fused to the fitting using standard butt
fusion procedures.
TX00456-9-15-94
PH00423-11-1-94
To Next Page
Loading...
