Preventative Maintenance
To insure optimum performance, the machine must be kept clean
and well maintained.
With reasonable care, this machine will give years of service.
Therefore, it is important that a regular schedule of preventive
maintenance be kept.
Store machine inside, out of the weather, whenever possible.
TX00428-8-10-95
Change Hydraulic Fluid and Filter
The hydraulic fluid and filter should be replaced when the filter
pressure gauge indicates “service filter” .
Fluid should also be changed as extreme weather conditions
dictate.
Refer to the "Hydraulic Fluids" section of this manual for hydraulic
fluid recommendations.
TX02140-04-28-14
Maintenance
Washing the Machine
The machine should be cleaned, as needed with a soap and
water wash.
Do not pressure wash.
TX00429-04-28-14
Check Hydraulic Fluid
The hydraulic fluid level should be checked daily.
If hydraulic fluid is not visible in the sight gauge, fluid must be added.
Refer to the "Hydraulic Fluids" section of this manual for hydraulic fluid
recommendations.
If fluid is not visible in the sight gauge, fill reservoir until fluid is visible
in the sight gauge. Do not overfill reservoir as the fluid will expand as it
heats up.
Never allow dirt, water or other foreign matter to enter the tank.
Use only clean fluid from an unopened container.
TX00430-04-28-14
CD00142-11-2-94
PH00432-11-1-94
PH02483-07-11-03
PH02604-09-18-03
7 - 1
To Next Page
Loading...
