Crush Points
Hydraulically operated jaws are operated under
pressure. Anything caught in the jaws will be
crushed. Keep all body parts out of the jaw area.
Always check pipe alignment with a pencil or
similar object.
TX03091-4-7-10
Fusion Equipment Safety
WR00012-12-4-92
1 - 4
Facer Blades Are Sharp
Facer blades are sharp and can cut. Never attempt
to remove shavings while the facer is running or is
in the facing position between the jaws. Use care
when operating the facer, and when handling the
unit.
NOTICE: Disconnect power from the facer, and remove the facer
blades before attempting any maintenance or adjustment.
NOTICE: Never extend the blade beyond the inner or outer
circumference of the facer.
TX02378-1-24-05
WR00073-4-6-93
Heater is Hot
The heater is hot and will burn clothing and skin.
Keep the heater in its insulated heater stand or
blanket when not in use, and use care when
heating the pipe.
NOTICE: Use only a clean nonsynthetic cloth to clean the heater
plates.
TX04244-10-12-10
WR00030-2-10-93
Heavy Lifting
Components of the DynaMc® EP fusion machines
may be heavy. Using one person to lift may
result in injury. Two people are required to lift
components.
TX04694-04-07-14
HeavyLifting
To Next Page
Loading...