Special Operations - In Ditch
4 - 3
Removing Top Jaws
If the carriage needs to be hoisted and slid underneath the pipe,
the top jaws may need to be removed.
Loosen all clamp knobs. Take out the detent pins securing the top
jaws and remove the jaws.
TX04018-4-12-10
PH04137-4-12-10
Clamp Carriage Assembly to Pipe
Position carriage assembly on top of the pipe. Lift pipe and rotate
carriage assembly under pipe.
Rotate carriage assembly around to a normal upright position.
Attach the top jaws if removed and loosely clamp around pipe.
TX04019-4-12-10
CD00194d-4-5-10CD00194d-4-5-10CD00195d-4-5-10
To Next Page
Loading...