DataLogger
®
Compatible
The DataLogger® from McElroy offers the ability to record and
document the parameters of the pipe fusion process. The latest
generation of the DataLogger is similar in size to the DataLogger
4, and like the DataLogger 4 has a rechargeable internal battery,
and a pressure sensor with a 0 to 3,000 PSI pressure range. The
FusionGuide™ feature gives a faster "go/no-go" interpretation
of graphs generated by the DataLogger. Trained inspectors can
look at the FusionGuide data to
determine if a fusion joint was
fused with correct pressures and
times according to supported
standards.
DataLogger Features:
• FusionGuide which provides
the user with a visual graphical
interpretation
• Multilingual Support
• Supports many fusion
standards
• Supports butt fusion, sidewall fusion and dual containment fusion
• On-screen coaching leads operator step by step to generate joint reports
• Flexibility to use your own pyrometer
• A GPS stamp thus making for easier and accurate location of fusion joint
• 1D Scanner to record bar coded information on pipe and fittings
• 5MP camera for pictures of fusion joints, jobsite, face-off and bead up
For more information, contact your distributor or visit www.mcelroy.com.
TX02567-10-5-15
Optional Accessories
To Next Page
Loading...