Lower the Carriage into Ditch
Lowering carriage without the skid
Open the jaws.
Attach lifting strap (not included) to carriage base.
Lift carriage assembly and lower into ditch.
Lower carriage on top of the pipe and rotate the carriage
underneath the pipe.
Lowering carriage with skid
Attach lifting strap to the carriage skid.
Lift carriage assembly and lower into the ditch.
Components of the DynaMc® EP fusion machines
may be heavy. Using one person to lift may
result in injury. Two people are required to lift
components.
Lowering the carriage without skid manually
Open the jaws.
Rotate the carriage on its jaws.
Two person lift the carriage using the carriage base.
Lift carriage assembly and lower into the ditch.
Lowering the carriage with skid manually
Two person lift the carriage assembly using the handles on each
end of the skid.
Lift carriage assembly and lower into the ditch.
TX04017-04-07-14
PH04121-4-5-10PH04120-4-5-10PH04122-4-5-10PH04122-4-5-10
Special Operations - In Ditch
4 - 2
To Next Page
Loading...