Hydraulic Manifold Block
Mounted on this block are a carriage directional control valve, a
pressure reducing selector valve, three pressure reducing valves,
and a 1500 psi gauge.
A) The carriage control valve, mounted on the top of the
manifold, determines whether the carriage is moving left, right,
or is in neutral.
B) A 1500 psi gauge is mounted on top of the manifold.
C) The selector valve, mounted on the front of the manifold,
selects a reduced pressure from one of the pressure reducing
valves.
Each pressure reducing valve is labeled with a different function:
D) The top valve adjusts facing pressure to a maximum of 400
psi.
E) The middle valve adjusts heating pressure to a maximum of
400 psi.
F) The bottom valve adjusts fusion pressure to a maximum of
1500 psi.
TX02133-07-08-03
Hydraulic Cylinders
The hydraulic cylinders provide the fusion force which is
dependent on the area of the cylinders.
Consult the "Maintenance" section of this manual for the
procedure to follow when bleeding air from system.
TX03094-4-7-10
PH04142-4-12-10
PH03949-3-29-10PH04126-4-7-10
CD00138A-9-12-94
Overview
2 - 4
Filter
This machine is equipped with a 10 Micron filter on the return
line.
TX02132-07-08-03
PH04143-4-12-10
To Next Page
Loading...