Fusion Machine Checklist
Item to Check Satisfactory Needs Repair Comments
Repair
UNIT
Machine is clean
All pins and snaprings are in place
All nuts and bolts are tight
All placards and handles are in place
All clamp knobs turn freely
Cords and plugs are in good condition
Oil reservoir is filled to correct level
Machine is free of hydraulic leaks
Hydraulic gauges read correctly
Jaws are properly aligned
Facer operates smoothly
Face-off is square
Inserts fit and pin properly
Carriage and Selector Valves operate smoothly
Pressure Reducing Valves operate in their range
Heater surface is clean and in good condition
Thermometer is in good working order
Surface temperature checked with pyrometer
Maintenance Checklist
8 - 1
TX04037-4-12-10
To Next Page
Loading...