Preventative Maintenance
To insure optimum performance, the machine must be kept clean
and well maintained.
With reasonable care, this machine will give years of service.
Therefore, it is important that a regular schedule of preventive
maintenance be kept.
Store machine inside, out of the weather, whenever possible.
TX00428-8-10-95
Change Hydraulic Fluid and Filter
The hydraulic filter should be replaced every year.
The hydraulic fluid should be replaced every two years.
Fill the reservoir from a clean container.
Refer to the "Hydraulic Fluids" section of this manual for hydraulic oil
recommendations.
TX03075-2-4-10
Maintenance
Washing the Machine
The machine should be cleaned as needed with a soap and water
wash.
TX00429-9-15-94
Check Hydraulic Fluid
Before connecting to power and with the machine off,
unscrew the dipstick and check the fluid level. The fluid
level should be within ± 0.25" of the notch of the dipstick.
IMPORTANT: Ensure HPU is on a level surface. Unscrew
the dipstick and wipe clean with a lint-free cloth. Screw
dipstick in completely then remove to check fluid level.
Refer to the "Hydraulic Fluids" section of this manual for
hydraulic fluid recommendations.
TX04000-03-24-14
CD00142-11-2-94
PH04143-4-12-10
7 - 1
PH04096-3-29-10
PH04136-4-12-10PH04145-4-12-10
To Next Page
Loading...