Clean Eyebolt Threads
Keep the clamp knob eyebolt threads brushed clean.
TX00435-9-13-94
PH03895-3-29-10
7 - 3
Maintenance
Facer Blades
Blades bolt directly to the blade holder and should be inspected
for damage and sharpness.
Dull or chipped blades must be replaced.
NOTICE: Never extend the blade beyond the inner or outer
circumference of the facer.
TX02475-3-29-05
Fasteners Must Be Tight
Check all nuts, bolts, and snap rings to make certain they are
secure and in place.
TX00437-9-13-94
Clean the Clamping Chains
On the 28 sidewall unit, clean the tailstock chains as needed.
Clean using a stiff-bristled brush and oil generously. Wipe
away any excess oil.
TX04034-4-12-10
PH04109-4-5-10
PH00433-11-1-94
PH03896-3-29-10
To Next Page
Loading...