McHale V Series Baler
59
6.6 Wheel chocks
Wheel chocks are provided to secure the machine wheels anytime the machine is to
be detached from the tractor, or if the machine is to be stored or parked up. They are
located on both the left and right of the back panels, on the rear of the machine.
Wheel chocks
CAUTION: Unsecure wheel chocks are a hazard for road users!
Ensure that the brackets are secure to hold the wheel chocks in place!
Wheel chocks coming loose (or falling onto the road), could result in a
hazard for third parties.
In most cases, both wheel chocks should
be used on one wheel, front and back, as
shown. The only exception to this is when
the machine is parked on hilly ground. In
that case, a chock should be used on
each wheel, on the downhill side of the
slope.
To Next Page
Loading...
