McHale V Series Baler
67
The recommended quantities of grease in grams for each grease point are shown below.
There is also a heavy duty PTO shaft available, as an option. The heavier duty PTO
shaft has a longer greasing interval (60 hr) and heavy duty profile tubing.
NOTE: Grease point intervals
The lower 3 PTO shaft grease points are to be greased at 8 hour
intervals. All other grease points are to be serviced at 60 hour intervals.
WARNING: Ensure PTO guarding is in good condition
Never use the machine if the PTO guarding is missing or damaged.
Entanglement in rotating drive line can cause serious injury or death.
Always stop the engine and ensure that driveline has stopped before
making connections, adjustments or cleaning out PTO driven equipment.
Grease at
60 hour
intervals
Grease at
8 hour
intervals
To Next Page
Loading...
