To Next Page

To Previous Page

Page 14 Speed Level Series - Service & Parts Manual

January 2019Section 4 - General Information

Parking Brake And Towing Circuit

The machine can be winched or moved short distances in case of power failure at speeds not to

exceed 5 MPH (8.05 km/h). Before towing or winching the machine, it is necessary to release the

brake. Reset the brakes after winching or towing.

AFTER DISENGAGING BRAKES THERE IS NOTHING TO STOP THE

MACHINE’S TRAVEL. MACHINE WILL ROLL FREELY ON SLOPES. BE ON

GUARD AGAINST RUNAWAY.

Prior to manually releasing brakes, insure wheels are chocked to prevent

unintentional movement.

Disengage Brakes Before Towing:

Chock the wheels.

Push and hold release valve.

Using the hand pump on the manifold, pump

valve until pressure is built and valve cannot

be pumped.

Machine is now ready for towing.

Engage Brakes Before Driving:

Pull out the manual brake release valve to

reset brakes.

Note:Brakes will reset automatically when drive

function is activated.

•

ART_2423

Hand Pump

Release Valve

Questions and Answers:

Need help?

Do you have a question about the Mec Speed Level Series and is the answer not in the manual?

Mec Speed Level Series Specifications

General