Mec Speed Level Series User Manual

Page 51 Speed Level Series - Service & Parts Manual
January 2019Section 6 - Electrical System
Upper Controls - 3084ES Electric
ART_3244
Emergency Stop
Joystick
Enable Bar
Lift / Drive
Steering
Speed / Torque
Automatic Leveling
Horn (Optional)
Manual Level: Front to Rear
7
9
OFF | ON Switch
5
10
11
Manual Level: Side to Side
12
1
2
3
4
Overload Indicator
Lamp
8
6
Control Description
1 Joystick
Drive Controls Forward and Reverse travel at variable speeds.
Lift
Move toward operator to elevate platform. Lift speed increases proportional to the joystick
movement. Will not function if TILT light is ON.
Move away from operator to lower platform. Speed is fixed.
2 Enable Bar Squeeze to enable DRIVE, STEER, and LIFT from joystick.
3 Steering Switch Using thumb, press and hold the rocker switch to steer Left or Right.
4
Lift/Drive
Selector
Select LIFT or DRIVE function for joystick.
5 Off/On Switch Turn power ON or OFF at the platform. Does not affect lower controls.
6
Tilt Indicator
Light
Light ON indicates platform out of level. Platform will not elevate when TILT light is ON.
6
Speed / Torque
Switch
High Torque Slow speed. Provides maximum torque for rough terrain and climbing.
Mid Range Mid speed. Provides medium torque for smooth to moderate terrain.
High Speed Provides high speed when platform height is below 10 feet (3 m).
8
Emergency
Stop Switch
PUSH to stop all machine functions.
TURN CLOCKWISE to reset.
9 Choke/Preheat Operate when starting in cold start conditions.
10
Generator
(Option)
Turn switch ON to engage optional AC generator. Drive and Lift are disabled while the generator is on.
11 Horn (Option) Press to sound warning horn.
11
Automatic Level
Switch
Move switch DOWN and hold until automatic leveling is complete.
Tilt Light will turn OFF when platform is level.
12
Manual Level
Switch Front to
Rear
Move switch to the left to LOWER the front of the platform.
Move the switch to the right to RAISE the front of the platform.
13
Manual Level
Switch Side to
Side
Move the switch to the left to move the platform to the LEFT.
Move the switch to the right to move the platform to the RIGHT.
14
Overload
Indicator
Platform overloaded when light is ON. Alarms will sound in Upper and Lower Control boxes.

Mec Speed Level Series Specifications

General

Brand	Mec
Model	Speed Level Series
Category	Boom Lifts
Language	English