14
> You will sometimes need to completely turn off your firewall (to do this, refer to your firewall's
manual).
In local ad hoc mode, your computer can only have a single WiFi connection (right now, it
is Spykee). This is why you cannot use WiFi Internet at the same time
3
.
5) You can now close the window and start the Spykee console.
If you need any assistance to connect you, please read the FAQ (chapter 14) or contact us:
- Online assistance: contact@spykeeworld.com
6.3. Starting the console in local ad hoc mode
1) Go to the Applications menu of your computer and start the Spykee programme.
2) The console will start up.
3) Click on the console connection icon.
4) After a few seconds, your Spykee robot will appear in “Local Robots”. This means that your
robot’s WiFi network was found.
Select your robot and click “OK”.
5) A window will open and ask you for the Login and Password of the robot user.
• If this is your first use:
Enter the administrator username and password (which are the robot’s default settings): both of
which are "admin".
An information message will appear to tell you that you are using the default username and
password in order to encourage you to customize them as soon as possible for security reasons
4
.
3
However, this is possible if you connect Spykee in local mode with a WiFi access point; see Chapter, Section 3.3
"Various Connection Modes".
To Next Page
Loading...
Need help?
General
