26
7.
INTERMEDIATE LEVEL: CONTROL SPYKEE IN LOCAL MODE WITH
WiFi ACCESS POINT
You have mastered your Spykee in ad hoc local mode (Beginner Level). You can now start the second
level of the game.
Prerequisite:
You must be connected in ad hoc local mode to continue.
One of the main advantages of local mode with WiFi access point is that you can use your robot while
connected to the Internet in WiFi.
If you need any assistance configure your WiFi access point or to connect you in local mode with
WiFi access point, please read the FAQ (chapter 14) or contact us:
- Online assistance: contact@spykeeworld.com
7.1. Robot configuration/ WiFi tab
7.1.1. Information about your WiFi access point
Please connect to Spykee in local ad hoc mode and go to the WiFi tab in the robot settings
Enter your WiFi access point:
• It is generally easy to configure Spykee’s connection to a domestic network using an access
point (AP) or a standard WiFi router, which is in turn connected to a cable or ADSL modem.
• If such is the case, just:
> Click on "New”. After a few seconds, the list of available WiFi networks will appear.
> Select the name of the WiFi network (SSID) of the WiFi access point to which you wish to
connect your robot.
> If the network is secured, you need to fill in the "key" field. The key corresponds to the security
key for your access point/WiFi router (called WEP or WPA). If you have never changed your WEP
To Next Page
Loading...
Need help?
General
