23
• Your Mac will open a search window where you can search for the sound effect you want to
add.
• Once you’ve selected the sound effect, click on Open.
• You can now click on either “Custom-1" or “Custom-2” to play the sound effect.
You can download new sounds from the site www.spykeeworld.com under the heading Download /
Sounds.
6.5.6. Video effects
Spykee contains eight video effects:
Thermic
Numbers
Inverse
B&W
Distortion
Shadow
Zigzag
Mirror
• To activate a video filter, click on its name.
• Observe the effect of filters on the video image!
• To stop the video filter, press on its name again.
You can apply several layers of video filters.
If you take a picture or record a video while the filters are active, they will show up on the pictures
or videos.
6.5.7. Light effects
• You can activate the lighting effect by clicking on the light bulbs (when the light is lit, the light
bulbs become red).
• You can also use the keys on your joypad.
• To turn off light effects, click on the light bulbs again (which will go back to green).
When you create light effects, these effects will be substituted for the lights indicating the Spykee
status
10
.
6.5.8. Taking pictures
• To take a picture, click once on the "picture" icon.
• You will hear a "Click-Clack" sound (from the console and the robot) which indicates that the
picture has been taken.
• Your picture will be stored in the directory defined in Configuration / General tab / Images
Directory.
If a video filter was activated, it can be seen on the photo taken!
10
Chapter 10 "LIGHTS AND SOUNDS OF THE ROBOT"
To Next Page
Loading...
Need help?
General
