16
• The configuration window will open in the Console Configuration section in the “General” tab.
• Images Directory: select the folder into which you would like to store pictures taken by Spykee.
• Video Directory: select the folder into which you would like to store videos recorded by Spykee.
• Joy Pad: select the control mode if joypads are available and connected to the computer.
A joypad is not necessary to play with Spykee.
6.4.2. Configuring the console / Video surveillance tab
• Select the "Video surveillance" tab.
• When the video surveillance function is activated, any movement will trigger a picture (stored
in the "Images Directory" file, see previous section 6.4.1).
• Additionally, you may be alerted in two different ways that movement has been detected:
> Spykee will activate a sound alarm on your computer (check "Play Sound").
> Spykee will send you an e-mail with the picture of the intruder (check "Send photo by email").
Note that in order for the sending of e-mails to work, the computer with the console must be
connected to the Internet. This option will therefore not work if you are connected to Spykee in
local ad hoc mode.
To Next Page
Loading...
Need help?
General
