17
If you check "Send a Picture by e-mail", please fill in the fields below:
6.4.3. Robot configuration / My Spykee tab
6.4.3.1. Registering your robot at www.spykeeworld.com
What is registering your robot’s data all about?
Registering your robot at www.spykeeworld.com means giving it its own name and confidential
password that only you will know.
Why should you register?
Registering your robot allows you to use the remote mode by giving it an identity.
To register your robot at www.spykeeworld.com
• On the Internet, go to www.spykeeworld.com under the heading “To register”, and click on
“Register your Spykee Robot”; follow the instructions.
• Fill out the questionnaire.
• Make sure you keep the following information in a secure place: “Name of my Spykee Robot”
and “Robot password”. You will be asked this information when you configure your robot for
remote mode. A confirmation email will allow you keep a trail of this information.
Your robot’s registration will only be valid after you’ve entered the information into your robot. You
will enter this information when you control Spykee at the Advanced Level (chapter 8 of this instruction
manual).
Robot registration is required for remote mode use (Advanced Level).
6.4.3.2. Fill in robot’s information : My Spykee tab
• Go to the Preferences menu to display your robot's configuration window. To do this, click on
the menu bar, select Spykee Console, then Preferences in the pull-down menu. *
You can also use the following keyboard shortcut:
• The configuration window will open. It has 2 parts:
• Click on the robot icon to access the robot configuration section. The icon turn green.
Console configuration