32
Restoring the VOL/MUTE universal function factory
settings
If you have changed the universal
VOL/MUTE
functions as
described in the previous two sections, you can reset the
functions to the factory settings.
1. Keep the S (Setup) key pressed
down for approx. 3 seconds,
until CODE SETUP appears.
2. Press S again briefly to open
SYSTEM SETUP.
3. Press OK" The
VOL/MUTE
SETUP
is displayed.
4. Press OK again. The
VOL/
MUTE ALL
menu is displayed.
5. Use the arrows (press
twice) to select the
VOL/MUTE
RESET
menu.
6. Press OK" The
CONFIRM
RESET
message is displayed.
7. Confirm with OK to reset the
settings.
8.
PLEASE WAIT appears again in
the display, followed by the
confirmation message
SUCCESS.
Univ-FB_MD 81302_UK.fm Seite 32 Montag, 7. August 2006 11:08 11
To Next Page
Loading...
Need help?
General
