MediSono P3V - Installing a Needle Guide

P3V Veterinary Digital Ultrasonic Diagnostic Imaging System User Manual
- 26 -
4.3.7. Installing a Needle Guide
To install the needle guide of convex probes:
1. Align the locating pin of the needle guide with the locating groove of the probe, align the
clamp of the needle guide with the locating groove of the probe to click.
2. Tighten the needle guide with the probe via the knob.
3. Insert the needle along the guide hole.
Figure 4-9 Parts of Needle Guide of Convex Probe
To install the needle guide of linear probes:
1. Align the locating pin of the needle guide with the locating groove of the probe, align the
clamp of the needle guide with the locating groove of the probe to click.
2. Tighten the needle guide with the probe via the screws and the thread knob.
3. Insert the needle along the guide hole.