MediSono P3V - Additional Control Functions

P3V Veterinary Digital Ultrasonic Diagnostic Imaging System User Manual
- 44 -
4. Press PW again to enter B+PW mode. The system locks the sample volume indicator and
adds the Time Series window.
5.4.8. Additional Control Functions
The P3V also provides the following additional control functions, which are available through
status menus.
Control function
Description
Scan Angle (sector
angle/ scan width)
Adjusts the sector angle for curve probes, and the scan width for linear probes,
providing a larger field of view in the far field.
Scan Density
Adjust the scan density, three level adjustable: high, middle, low
Dynamic Range
Controls the overall contrast resolution of B mode.
Frame Persist
Selects the number of frames for frame averaging to present a smoother, softer
image.
Line Persist
Adjusts the line persist level.
Rejection
Adjusts the rejection level.
eSRI
Set image speckle reduction attribute.
SRA
Turn on or off the synthetic receiving aperture
GAC
Set the gray auto control
Gray Map
Selects the post-processing gray curve map.
B/W Invert
Set the color to black or white.
90° Rotate
Rotate the image by 90 degrees (in B mode).
Sweep Speed
Adjusts the scrolling speed level of the M mode and PW mode sweep.
Steer
Adjust the sample line position, linear probe only.
WallFilter
Adjust the filter wave. (0~3)
D Dynamic Range
Controls the overall contrast resolution of PW images
D Rejection
Adjusts the rejection level in PW mode.