P3V Veterinary Digital Ultrasonic Diagnostic Imaging System User Manual
- 59 -
To connect a USB printer:
1. Connect the USB printer via the USB port.
2. Check the printer, referring to the printer user manual.
3. Check the Report Printer and Print Report Image in general preset.
4. Enter the desired worksheet to edit the examination and diagnosis information.
5. Run the printer.
USB printing:
Press Print of the worksheet dialog box. Printer begins to print.
Digital graphic printer:
1. Connect the Digital graphic printer via the USB port.
2. Check the printer, referring to the printer user manual.
3. Run the printer.
4. Press Print of the worksheet dialog box. Printer begins to print.
NOTE:
1. Before printing, make sure there is enough paper for printing.
2. Before printing, make sure the presetting printer type is correct.
3. Before printing, make sure the printer power cord and the USB cable are connected
well.
4. Do not cut off the printer power supply or the USB cable during printing.
5. If the printer can not work normally, please restart the printer and the P3V.
To Next Page
Loading...