P3V Veterinary Digital Ultrasonic Diagnostic Imaging System User Manual
- 83 -
2. USB disk or portable hard disk must be in FAT32 format.
3. Do not use the USB disk or portable hard disk for other uses, but only for this device.
Otherwise the storage and the transmission function may not be stable.
4. We suggest that you use the USB disk or portable hard disk supplied or
recommended by the manufacturer.
To send files
1. Connect a USB disk or portable hard disk to the system, press File, and select File Manager
in the file menu.
2. Select a desired driver from the Driver pull-down menu and press Set, point to the file or
folder that need to be sent and press Set.
3. Select a destination driver from the Destination pull-down menu. The destination driver
includes local disk, USB-disk, portable hard disk or DICOM server (If DICOM function is
installed).
4. If the destination driver is DICOM server, press File Send to send the DICOM and CIN files
to DICOM server directly;
If the destination driver is local disk, USB-disk or portable hard disk, press File Send to open
the File Send dialog box, select a target folder on the left, or press New Folder to create a
folder for storing files.
5. Press OK to send files to the target directory.
To delete a file folder/file
1. Select a desired driver from the Driver pull-down menu and press Set.
2. Point to the file folder/file that needs to be deleted, and press Set.
3. Press Delete, and you will be prompted whether to delete the files.
4. Press Yes to delete the files, or No to give up.
To rename a file
1. Select a desired driver from the Driver pull-down menu and the file format, and then press
Set.
2. Point to the file that needs to be renamed, and press Set.
3. Press Rename to open the Input new name for the file dialog box, enter a new file name
with the keyboard.
4. Press OK to rename the file, or Cancel to give up.
To open files
1. Select a desired driver from the Driver pull-down menu and file format, and then press Set.
2. Point to the file that needs to be opend and press Set, press Open or double click on the file, a
To Next Page
Loading...