P3V Veterinary Digital Ultrasonic Diagnostic Imaging System User Manual
- 85 -
To send a DCM Image
1. Highlight the secondary menu DCM Image, and then press Set.
2. If the server is running normally, the current image will be sent to the server.
3. The system displays a prompt indicating the successful transmission.
To send a DCM file
1. Highlight the secondary menu DCM File, and then press Set.
2. The system displays the File Opening Dialog Box for selecting a DCM file to be transmitted.
3. If the server is running normally, the selected file will be sent to the server.
4. The system displays a prompt indicating the successful transmission.
To send a DCM package
1. Highlight the secondary menu DCM package, and then press Set.
2. The system displays the File Opening Dialog Box for selecting the driver.
3. If the server is running normally, all the DCM files of the selected driver will be sent to the
server.
4. The progress bar disappears after successful transmission.
To send Cine Images
1. Freeze the system.
2. Press File to enter the file menu.
3. Highlight the secondary menu Cine Images, and then press Set.
4. If the server is running normally, the current Cine images will be sent to the server.
5. The progress bar disappears after successful transmission.
To send a Cine File
1. Highlight the secondary menu Cine File, and then press Set.
2. The system displays the File Opening Dialog Box for selecting a cine file to be transmitted.
3. If the server is running normally, the selected file will be sent to the server.
4. The progress bar disappears after successful transmission.
NOTE: When a DCM image or a DCM file is sent, the images and measurement
parameters will be sent together.
To Next Page
Loading...