BD0333FE ZP-BD03E MOM2
15
4 FUNCTIONS AND SET UP
4.3 Bluetooth –
SET /
Display abbreviations
SEt Set
SPC Set-up PC
SHS Set-up headset
Prd Paired
E-d Enable / Disable (headset)
EnA Enabled (headset)
dIS Disabled (headset)
o Processing
ErA Erase all addresses
Enable / Disable Bluetooth
1]
Use the ◀ ▶ keys to find "E-d".
2] Press OK to toggle between "EnA" (Enabled
and "diS" (Disabled).
Note Do not use the PC COM mode if there is a
requirement for non-electromagnetic interfer-
ence in the environment.
The PC COM position is always enabled as it
overrides the disable setting.
Set up Bluetooth
1]
Select SET / on the MOM2.
2] Press ▶, "SPC" will be shown.
3] Press "OK. Display will show "o".
The MOM2 is now visible in the Bluetooth
network and ready to be paired.
4] On the PC, in the "Control Panel" select
"Bluetooth Devices".
5] Click "Add".
6] Check the box and click "Next".
7] The PC should now find the MOM2.
To Next Page
Loading...
