Megger DET2/3 User Manual

DET2/3
12
Set-up
Set-up
This section details the instrument set-up.
Modify parameters
1. Set the Mode switch to .
2. Press
OK
to select a set-up group.
3. See instructions below for each set-up group.
Note: The set-up group screen is not active until
OK
is pressed.
 Setting in bold: Current setting
 Setting underlined: Current selection
General set-up
1. Press to scroll through the parameters
2. Press
OK
to select the highlighted parameter.
3. Use to move left and right through the parameter options.
Date / Time
1. Press to modify current selected setting.
2. Press
OK
to accept.
Auto Off / Auto Dim / Brightness
1. Press to modify current selected setting.
2. Press
OK
to accept.
OK
must be pressed to exit the parameter, even if no parameter was modified.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Megger DET2/3 Specifications

General

Brand	Megger
Model	DET2/3
Category	Test Equipment
Language	English