DET2/3
3
Safety
Safety and hazard icons
This section details the various safety and hazard icons on the instruments outer case.
Icon Description
F
Warning: High Voltage, risk of electric shock
G
Caution: Refer to User Guide
Equipment complies with current EU directives
Equipment complies with current 'C tick' requirements
Do not dispose of in the normal waste stream
Warning Icons
This section details the warning icons that can show on the display.
Icon Warning Description
F
External Voltage Warning If an external voltage is applied between the terminals and the instrument
is set to On, the high voltage warning will flash to say that the item
under test is live and might be dangerous and the test is disabled.
The high voltage warning message will flash if more than 30 V potential
difference is applied between the voltage terminals and the current
terminals.
This warning will not show if all terminals are at the same high voltage.
Note: The warning will not operate if the instrument is set to Off.
Internal Error Warning Internal Error Warning switch off and back on. Contact Megger if not
Read the User Guide Refer to the user guide if this message shows.
Warnings, Cautions and Notes
Warnings
Warnings alerts the reader to situations where a hazard to personnel can occur. They are placed before the event
to which they relate and are repeated at each applicable occasion.
Cautions
Cautions alerts the reader to situations where equipment damage may result if a process is not followed. They are
placed before the event to which they relate and are repeated at each applicable occasion.
Notes
Notes give additional information that aid the reader in the use or understanding of the equipment or subject,
they are not used when a Warning or Caution is applicable.
They are not safety related and may be placed either before or after the associated text as required.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
