25
Figure 15 DAR recall results
To recall a PI or DAR result:
1. Rotate the selector switch to the recall (RCL) position and observe the latest unique
test result identification number displayed.
2. Locate the particular test result identification number by using the [] and []
buttons, then press ‘OK’ to select.
3. The test result will be displayed. To scroll through the different measurements used
in calculating the PI or DAR ratio, use the [] only button. See figure 15 screens B to
E.
Screen B – t2
Screen C – t1
Screen D – VOLTAGE
Screen E – ID
Screen A -
DAR
Step 2:
Select
result
Step 1:
Switch to RCL
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
