Megger MIT400 Series - Deleting Test Results; Deleting a Single Test Result

26
16. Deleting test results
(MIT420, MIT430, MIT481 and MIT485 only)
Stored test results may be deleted singularly or all together.
16.1 Procedure for deleting a single test result (refer to Figure 16)
Figure 16 Deleting a single test result
1. Turn the instrument ‘ON
’
by rotating the selector switch to the delete [DEL] position.
2.
The latest test result will be displayed. Where no results have previously been stored, the
display will indicate this by three dashes.
3.
Press ‘OK’ to delete the displayed test result.
4.
Observe the ‘new’ last test result identification number, which may be deleted as
previously described.
Memory
usage
indicator
Step 2:
Check
correct
record
Step 3:
Press OK to
delete
Step 1:
Switch to DEL
Step 4:
Observe ‘new’ last
test result ID
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com