23
15. Saving, recalling and downloading test results.
(MIT420, MIT430, MIT481 and MIT485)
15.1 Saving test results
After completing any test the result remains displayed on the screen for one minute. During
this time the result may be saved in memory and recalled later.
Figure 13 Test results storage
Procedure for storing test results (refer to Figure 13)
1.
After completion of a particular measurement, ensure the test result is displayed on the
instrument display, refer to Figure 13 Screen A.
The test result will remain displayed for one minute during which time the result may
be stored.
2.
Press [STORE] to record the test result. A unique identification number is allocated to
each test result which is displayed for 15 seconds before returning to the test result.
3.
Result is now stored.
15.2 Test results recall
(MIT420, MIT430, MIT481 and MIT485)
All stored test results may be recalled to the screen.
Step 1:
Screen A result
Step 2:
Press STORE
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
Need help?
General
