Megger MIT400 Series User Manual

27
16.2 Procedure for deleting all test results (refer to Figure 17)
Figure 17 Deleting all test results
1. Turn the instrument ‘ON
’
by rotating the selector switch to the delete [DEL] position.
The latest test result will be displayed. Where no results have previously been stored, the
display will indicate this by three dashes.
2.
Press next ( ) button. Note that the display now indicates ‘ALL’
3.
Press ‘OK’ to delete all the test results. Note the progress bar decays as the contents of
memory are deleted.
4.
On completion of the deletion progress the display indicates three dashes signifying
that no result remains stored. See figure 17 screen C.
Screen A
Step 2:
Press
‘Next’ –
Screen B
appears
Step 3:
Press OK to
delete all stored
test results
Step 1:
Switch to DEL
Screen B
Screen C
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Megger MIT400 Series Specifications

General

Brand	Megger
Model	MIT400 Series
Category	Test Equipment
Language	English