MELAG Vacuklav 41 B Plus Evolution - Program End

7 Sterilization
31
Proceed as follows to abort the program during drying:
1. Press STOP on the action bar.
2. Confirm the security query with YES.
3. After a short time, you can open the door by
pressing the door symbol.
Program end
When the program has ended successfully, the corresponding message will be issued on the display.
Working in theSettings menu →Logging if immediate output after program end is activated, (=
Immediate output), the log of the completed program will be outputted to the activated output medium after
opening the door.
Before opening the door, you can view further values from the program which has just completed, e.g. the
plateau time conductivity by pressing the magnifying glass symbol .